This is our standard Dot Pin Marking machine, indigenously built, and easily inferable with SCADA, PLC, SAP etc.

Features

These are the three type of Dot Peen Marking Machines

STANDARD DPM

These machines are available in standard, portable & integrated models.

INTEGRATED

These machines are available in standard, portable & integrated models.

PORTABLE

These machines are available in standard, portable & integrated models.

We can use dot marking machine to mark on various materials such as plastic, metal, die cast. You can check the following gallery for marked jobs done by Laser Automation Pvt. Ltd.

Frequently Asked Questions

It works on pneumatic pressure.

It can mark on all type of metals. MS, SS, aluminum, casting, forging etc.

It can mark up to 0.5 to 0.7 mm. Material hardness should be less than 25 HRC (Hardness Rockwell C).

It cant mark on glass, rubber, wood, ceramic etc.

Yes. Logo file must be in .plt format

QR code can be marked. (Under development)

Standard marking area is 100mm X 100mm, optional 80 X 40, 25 X 25, 150 X 150, 200 X 200.

Yes. We can mark incremental serial numbers using dot peen marking machine.

Standard height is 200 mm. Optional 300, 400.

Yes, but marking pin life shall be very less.

1000000 characters of 3 mm font size, on MS material.

Yes, but paint will be pealed off.

General cleaning and servicing is required once in a three months.